HIKVISION DS-6401HDI Series, User Manual

Page: 30 / 35

29
Pause cycle decoding
Resume cycle decoding
Configure the cycle decoding dwell time
Click “ ” to enter the setup management interface and then click “Local Settings” to enter preview settings
interface (refer to the following figure) which allows user to set the TV Wall Dwell Time.
After configuring the time, click the “Save” button to save the configuration.
Note : it is recommended to set the dwell time of cycle decoding to be longer than 5s.
Right click the current cycle decoding window, and
select the “Pause cycle decoding” or click “ ” to
pause the cycle decoding.
When the cycle decoding is in paused status, user may
right click on the decoding window and select
“Resume cycle decoding” or click “ ” to start cycle
decoding again.