HIKVISION DS-6401HDI Series, User Manual

Page: 25 / 35

24
Window division configuration
After having enabled the decoding output and
configured the display mode, user can change
the size and position of the display window.
Click the mouse and hold on the title below
the window to change its position. By
dragging a border of the decoder, user can
change the size of the window. You can also
use the layout toolbar to adjust the size and
position.
By right clicking the decoder channel, user can
select the screen division mode.
Currently, all of HDMI, DVI, BNC and VGA
outputs can be selected to 1 or 4-division display
modes.
After configuration of the window division, if it
has reached the limit of decoding source, then the
system will display the warning message of
“decoder channel not available!” when the user
continues to enable the decode output channel.
If the output name is set to VGA, HDMI or
DVI output, then user can select the
resolution from the drop-down menu.