Expansion Bolts
Fixing Screws
Figure 2-2
Attach the Mounting Base to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are required
to fix the camera. For wooden wall/ceiling, self-
tapping screws are required.
5.
Route the cables through the cable hole, or the side
opening.
6.
Align the camera with the mounting base, and secure
the camera on the mounting base.
Figure 2-3
Secure the Camera with Mounting Base
7.
Connect the corresponding cables, such as power
cord, and video cable.
8.
Power on the camera to check whether the image on
the monitor is gotten from the optimum angle. If not,
adjust the camera according to the figure below to get
an optimum angle.
Rotation Position
[0°to 360°]
Tilt Position
[0°to 75°]
Pan Position
[0° to 360°]
Figure 2-4
3-axis Adjustment
1).
Hold the camera body and rotate the enclosure to
adjust the pan position [0° to 360°].
2).
Move the camera body up and down to adjust the
tilt position [0° to 75°].
3).
Rotate the camera body to adjust the rotation
position [0° to 360°].
2.2
Mounting with Inclined Ceiling Mount
Before you start:
You need to purchase an inclined ceiling mount
separately.
Steps:
1.
Paste the drill template (supplied) to the place where
you want to install the camera.
2.
Drill screw holes, and the cable hole on the
ceiling/wall according to the supplied drill template.
