the image. The greater the value is, the brighter the
image is.
CONTRAST
This feature enhances the difference in color and light
between parts of an image. You can set the CONTRAST
value from 1 to 9.
SHARPNESS
Sharpness determines the amount of detail an imaging
system can reproduce. You can set the SHARPNESS value
from 1 to 9.
SATURATION
Adjust this feature to change the saturation of the color.
The value ranges from 1 to 9.
DNR (Digital Noise Reduction)
The DNR function can decrease the noise effect,
especially when capturing moving images in poor light
conditions, and delivering more accurate and sharper
image. You can set the DNR value from 1 to 9.
MIRROR
OFF, H, V, and HV are selectable for mirror.
OFF: The mirror function is disabled.
H: The image flips 180° horizontally.
V: The image flips 180° vertically.
HV: The image flips 180° both horizontally and vertically.
3.6
FUNCTIONS
3.6.1
WHITE LIGHT
The embedded white light source can be worked as the
visible alarm.
In the WHITE LIGHT mode, you can set the mode as
ALARM, or OFF.
When you select the WHITE LIGHT as ALARM, you can set
the parameters in the TRIGGER MODE, and the ALARM
MODE to meet your needs.
TRIGGER MODE
DVR
Select the TRIGGER MODE as DVR. In this way, the alarm
signal is sent from the DVR, and the camera works as the
alarm detector in the process. Besides, the alarm type
only supported by the DVR can also triggers the visible
alarm in the camera.
CAMERA
Select the TRIGGER MODE as CAMERA, the embedded
PIR module sends the alarm signal to the visible alarm in
the camera, when PIR module detected the alarm source.
ALARM
In the ALARM mode, you can select the ALARM MODE as
SOLID, or FLASHING.
FUNCTIONS
WHITE LIGHT
TRIGGER MODE
ALARM MODE
TIME SETTING
PIR LEVEL
BACK
EXIT
SAVE & EXIT
ALA RM
C AM ER A
SO LID
15 S
3
Figure 3-6
ALARM MODE
SOLID
