Select the ALARM MODE as SOLID. In this way, the white
light source turns on, when the PIR module received the
alarm signal.
In the TIME SETTING you can set the time as 5 s, 10 s, 15
s, 30 s, or 60 s, which means that the solid mode stays for
the set time when the camera received one alarm signal.
Note:
The solid mode will be stayed for another set time when
second alarm signal is received, and the rest can be done
in the same way.
FLASHING
Select the ALARM MODE as FLASHING. In this way, the
white light source flashes when the PIR module received
the alarm signal.
OFF
Select OFF to give up this function.
3.6.2
PIR LEVEL
Adjust the sensitivity of the PIR module, and the greater
the value is, the more sensitive the PIR module is.
3.7
FACTORY DEFAULT
Reset all the settings to the factory default.
3.8
EXIT
Move the cursor to EXIT and click Iris+ to exit the menu.
3.9
SAVE & EXIT
Move the cursor to SAVE & EXIT and click Iris+ to save the
settings, and exit the menu.
UD10294B