English
57
2. Turn the grinder “on”.
[G3610DVE, G3613DVE, G3615DVE] (
Fig. 14
)
When you start the tool,
fi
rstly push the rear part of switch, then push the switch forward.
When you need to keep switch in ON position, push the head of switch to latch in ON
position.
When release the switch to OFF position, push the rear part of switch.
ON
OFF
Fig. 14
Switch
[G3610DVF, G3613DVF, G3615DVF]
To switch on, slide the o
ff
-lock lever in the direction
of
Ⓐ
and press the switch lever (2 locations) in the
direction of
Ⓑ
as shown in
Fig. 15
. Release the switch
lever to switch o
ff
.
3. Use light grinding pressure.
There is no need to press hard when grinding. Usually the grinder’s own weight is su
ffi
cient
to allow the required light contact with the surface to be ground.
WARNING
Do not press the grinder forcibly against the surface to be ground. Heavy pressure
can result in wheel breakage and serious injury. It can also damage the surface
being ground or damage the grinder’s motor.
O
ff
-lock lever
Switch lever
Ⓑ
Ⓐ
Fig. 15
00Book̲G3610DVE̲ChS.indb 57
00Book̲G3610DVE̲ChS.indb 57
2022/08/26 16:18:39
2022/08/26 16:18:39
