English
53
6. Use only properly rated depressed center wheels.
Use only depressed center wheels rated at 13300 r/min or more.
Using a depressed center wheel rated less can lead to wheel disintegration during
operation and cause serious bodily injury.
7. Check the push button.
Make sure that the push button is disengaged by
pushing push button two or three times before turning
on the grinder. (
Fig. 9
)
8. Remaining battery indicator
You can check the battery’s remaining capacity
by pressing the remaining battery indicator
switch to light the indicator lamp.
(Fig. 10, Table 4)
The indicator will shut o
ff
approximately
3 seconds after the remaining battery indicator
switch is pressed.
It is best to use the remaining battery indicator
as a guide since there are slight di
ff
erences
such as ambient temperature and the condition
of the battery.
Also, the remaining battery indicator may vary
from those equipped to a tool or charger.
(A battery is not included with this product.)
Table 4
State of lamp
Battery Remaining Power
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty. Recharge the battery
soonest possible.
Push button
Fig. 9
Fig. 10
Remaining battery
indicator switch
Remaining battery
indicator lamp
Display panel
00Book̲G3610DVE̲ChS.indb 53
00Book̲G3610DVE̲ChS.indb 53
2022/08/26 16:18:38
2022/08/26 16:18:38
