English
63
5. Filter cleaning and inspection
WARNING
Wear protective glasses and a dust mask when
cleaning the
fi
lter with an air gun. Failure to do so
may result in inhalation or exposure of the eyes to
debris or dust.
After use, remove any debris or dust adhered to the
fi
lter using a soft brush. (
Fig. 22
)
Check the
fi
lter periodically to ensure that it is free of
scratching, chipping, or tearing. Replace with a new
fi
lter if the
fi
lter is damaged in any way.
NOTE
○
If the mesh is clogged and the debris or dust cannot be
removed, detach the
fi
lter and clean it with an air gun,
etc. (
Fig. 23
)
○
After cleaning, make sure to securely attach the
fi
lter.
6. Maintenance of the motor
The motor unit winding is the very “heart” of the power tool. Exercise due care to ensure the
winding does not become damaged and/or wet with oil or water.
NOTE
In order to expel debris and dust, periodically run the motor with no load.
7. Storage
Store the cordless disc grinder in a place in which the temperature is less than 40°C, and
out of reach of children.
NOTE
Storing lithium-ion batteries.
Make sure the lithium-ion batteries have been fully charged before storing them.
Prolonged storage (3 months or more) of batteries with a low charge may result in
performance deterioration, signi
fi
cantly reducing battery usage time or rendering the
batteries incapable of holding a charge.
However,
signi
fi
cantly reduced battery usage time may be recovered by repeatedly
charging and using the batteries two to
fi
ve times.
If the battery usage time is extremely short despite repeated charging and use, consider
the batteries dead and purchase new batteries.
CAUTION
In the operation and maintenance of power tools, the safety regulations and
standards prescribed in each country must be observed.
Fig. 23
Fig. 22
Mesh
Filter
Soft brush
Filter
00Book̲G3610DVE̲ChS.indb 63
00Book̲G3610DVE̲ChS.indb 63
2022/08/26 16:18:40
2022/08/26 16:18:40
