Hikari H9199, Instruction Manual Book And Parts Book

Page: 60 / 99

INSTRUCTION MANUAL
- 48 -
B. Oil tank oil quantity
Check the oil gauge window(1), and add more oil if
the oil gauge(2) is below the lower reference line.
(Refer to page7).
7-2 Applying grease
If “E24” flashes on the panel display(1) when the power switch is turned on, it means that grease needs to be applied.
The sewing machine will not operate at this time, even if the treadle is depressed. Apply grease as required, while
referring to the following for details.
<
Applying grease
>
Use HIKARI-specified grease
(1) Turn the power switch to “OFF”.
(2) Remove the screws and the set screws.
(3) Apply grease to each of the holes until the grease overflows slightly.
(4) Tighten the screws and the set screws in order to push the grease in.
(5) Turn the machine pulley by hands to move the needle bar up and down several times in order to disperse the grease.
(6) Use a cloth to wipe away any excess from around the screws and set screws and from underneath needle bar bush D.
Upper reference line