INSTRUCTION MANUAL
- 43 -
5. SEWING
CAUTION
Attach all safety devices before using the sewing machine. If the machine is used without these devices
attached, injury may result.
Turn off the power switch at the following times.
The machine may operate if the treadle is depressed by mistake, which could result in injury.
·When threading the needle
·When replacing the bobbin and needle
·When not using the machine and when leaving the machine unattended
Do not touch any of the moving parts or press any objects against the machine while sewing, as this may
result in personal injury or damage to the machine.
Use both hands to hold the machine head when tilting it back or returning it to its original position. If only one
hand is used, the weight of the machine head may cause your hand to slip, and your hand may get caught.
5-1 Sewing
1)
Carry out the programming which is necessary for
sewing.
2) Depress the treadle to start sewing.
5-2 Back tacking
When the actuator(1) or the reverse lever(2) is pressed
during sewing, the feed direction will be reversed. When
it is released, the feed direction will return to normal.
Summary of Contents for H9199
