Hikari H9199, Instruction Manual Book And Parts Book

Page: 50 / 99

INSTRUCTION MANUAL
- 38 -
3-3
．
Lubrication
CAUTION
Do not connect the power cord until lubrication has been completed, otherwise the machine may operate if the
treadle is depressed by mistake, which could result in injury.
Be sure to wear protective goggles and gloves when handling the lubricating oil and grease, so that they do
not get into your eyes or onto your skin, otherwise inflammation can result.
Furthermore, do not drink the oil or eat the grease under any circumstances, as they can cause vomiting and
diarrhea.
Keep the oil out of the reach of children.
When cutting the nozzle of the oil tank, hold the base of the nozzle securely.
If you hold the end of the nozzle, injury from the scissors may result.
·The sewing machine should always be lubricated
and the oil supply replenished before it is used for
the first time, and also after long periods of non-use.
·Use only the lubricating oil(Nisseki Mitsubishi
wing -Lube specified by HIKARI.
*If this type of lubricating oil is difficult to obtain,
the recommended oil to use is <Exxon Mobil
Essotex SM10;VG10>.
1) Hold the base of the nozzle on the accessory oil
tank(1), and then use scissors to cut 3-5 mm off
the end of the nozzle.
2) Remove the rubber cap (2), and pour 120ml of
lubricating oil Into the oil tank.
(Use the upper reference line( 4) as a guide
when pouring.)
3) Replace the rubber cap(1).
<
Lubrication oil replenishment interval
>
If the oil gauge (6) drops below the lower reference
line (5), be sure to replenish the oil.