P l e a s e G i v e P a r t N o . , D e s c r i p t i o n a n d U n i t S e r i a l N o .
HIGHWAY EQUIPMENT COMPANY
22
89008-A
Page Rev. A
PROGRAMMING A JOB
The Mark V can store up to 16 separate jobs. A job is a group of unique application and machine
settings that are used to apply a particular product. Once a job is created, the Mark V stores it until you
decide to delete it.
An active Job is the job that appears on the main screen. The active job settings are used to control the
application of product. Every time a different job is activated for use, the Mark V automatically is set to
properly apply that product using the stored values. Settings for Units/acre, Application rate, Spread
width, Feed gate opening, Product density, Product, Spinner speed, Fan frame setting, and Calibrated
CFR are used for each job.
Creating the first Job
The very first time a console is used, there will be no active job available and you must create a new
job.
From the main screen, press the JOB key. The screen in Figure 9 appears.
ACTIVE JOB
ACTIVE JOB
PRODUCT
RATE
WIDTH SPINNER
GATE
--NONE--
ACCEPT
CHANGE
JOB
CANCEL
Figure 9
Press the CHANGE JOB key. The screen in Figure 10 appears.
Summary of Contents for New Leader MARK V DGPS-Ready
Page 2: ......
