P l e a s e G i v e P a r t N o . , D e s c r i p t i o n a n d U n i t S e r i a l N o .
HIGHWAY EQUIPMENT COMPANY
14
89008-A
Page Rev. A
CALIBRATION AND MACHINE SETTINGS
Prior to running any job and spreading material, the Mark V needs to be configured and calibrated to
match the spreader you are using. The console can also be set up to match the preferences of the user.
Any optional GPS must also be configured – see your DGPS & Lightbar manual for more information.
To begin the configuration of your Mark V, start from the main screen and press the Menu Selection
Key directly under SETUP. The screen changes to the Setup Options display. The menu selection area
displays the choices of Machine settings, Cal radar, Console, Diagnostic, and GPS. The right and left
Menu Selection Arrow keys indicate addition selections. Each setup area is entered by pressing the
adjacent Menu Selection Key.
The unit does not have to be installed in the vehicle to make machine settings, console settings, or to
view system diagnostics. An optional power supply is available to operate the unit from your home,
office, or shop.
Machine Settings
From the main screen, press the SETUP key. Press the MACHINE SETTINGS key. The screen shown
in Figure 6 appears.
MACHINE SETTINGS
Spinner valve type
BRAND 55 GPM
Theoretical (CFR)
0.256 cu.ft/rev
Ground speed sensor
RADAR
Manual speed
10.0 mph
Conveyor switch
INTERNAL
Maximum conveyor rpm
50 rpm
Spinner pulses/rev
4
EDIT
EXIT
Figure 6
Summary of Contents for New Leader MARK V DGPS-Ready
Page 2: ......
