Highway Equipment Company New Leader MARK V DGPS-Ready, General Manual, Page: 14 / 45

P l e a s e G i v e P a r t N o . , D e s c r i p t i o n a n d U n i t S e r i a l N o .
HIGHWAY EQUIPMENT COMPANY
12
89008-A
Page Rev. A
CONSOLE OVERVIEW
Figure 4 is an example of the main screen of the Mark V that is displayed on power up. The display
shows four typical on-the-go parameters. A menu selection area is along the lower edge of the screen.
The menu selection area also displays current information about an active job or machine condition.
The Quick Reference sheet included with the Mark V shows an overview of different screens.
Figure 4
MAIN SCREEN DISPLAY
To change the display items on the start up screen, press the Display Selection key to the right of the
display line you wish to change. A box appears around the display line and four possible display items
appear at the bottom of the screen in the menu selection area. Pressing the Menu Selection Arrow keys
scroll the menu to display new choices.
To select a new display item, press the Menu Selection Key below the item you want to view. This will
replace the previous display line with the one just chosen. You can change all four display lines to the
information you want to view and arrange them in any order.
These arrows indicate there are more display items to
view. Press Menu Selection Arrow keys to view
additional display items.
This selection box indicates you can choose a
different display item for the line. Press Display
Selection key to right of any display line to
change the type of information displayed.
Four
display
lines
display
unique
information
This Up/Down Arrow symbol
indicates pressing the Up or
Down Arrow keys will change
the displayed value. Press
Display Selection key to right
of line to display arrow symbol.
The displayed value can only be
changed for “Rate,” “Spin.
Speed” or “Lightbar Pass#.”