Highway Equipment Company New Leader MARK V DGPS-Ready, General Manual, Page: 13 / 45

P l e a s e G i v e P a r t N o . , D e s c r i p t i o n a n d U n i t S e r i a l N o .
HIGHWAY EQUIPMENT COMPANY
11
89008-A
Page Rev. A
CONSOLE OVERVIEW
KEYPAD AND DISPLAY
The first step in operating the Mark V is to understand the function of the keys and how they relate to
the console display. There are two toggle switches and four groups of unlabeled white push keys. The
push key groups are defined as Arrow keys, Display Selection keys, Menu key, and Menu Selection
keys. Display Selection key and Menu key labels appear on the display adjacent to these keys.
A summary of key functions follows. Also, a Quick Reference sheet is included with the Mark V and is
a handy tool.
Figure 3
Power Switch: Selects power ON ( | ) and OFF (O) for the console.
Conveyor Switch: Turns the main conveyor ON (green) and OFF (red).
Menu Key : Used to exit setup screen or advance menu display.
Menu Selection Keys: Activates the menu or picks the command displayed directly above the key. The
left and right arrow keys display other menu choices when arrows are displayed.
Display Selection Keys: Selects the display line to the left of the key and displays a new menu selection
at the lower edge of the display.
Arrow Keys: Changes value of a selected display line when up and down arrow symbols are present.
Used to navigate setup screens and change values of highlighted areas.
Display
Selection Keys
Menu Selection
Keys
Menu Key
Power
Switch
Conveyor
On/Off
Switch
“DG” appears here when a
DGPS-5000 is connected
and the signal is good.
Arrow
Keys