P l e a s e G i v e P a r t N o . , D e s c r i p t i o n a n d U n i t S e r i a l N o .
HIGHWAY EQUIPMENT COMPANY
18
89008-A
Page Rev. A
CALIBRATION AND MACHINE SETTINGS CONTINUED
Maximum conveyor rpm
Set to the maximum allowed conveyor RPM. If the vehicle speed is too fast for the programmed
application rate and the conveyor rpm would need to exceed this setting, the Mark V will beep and flash
“Maximum Conveyor RPM, Slow Down”. [Note: The actual conveyor rpm will not exceed this
setting. If the warning to slow down is ignored, the rate applied will be incorrect.]
Set to
50
for an L3020G4.
Set to
40
for an L2020G4.
Spinner pulses/rev
Set to the number of pulses generated by the spinner speed sensor per revolution of the spinner disk.
Set equal to number of fins on the disk.
If a spinner sensor is not active, set to zero. This disables any spinner speed alarm that would be
generated when the spinner speed does not match the job setting.
Press the EXIT key to return to the Setup Options screen. Press the Menu Key
to return to
the main screen.
Summary of Contents for New Leader MARK V DGPS-Ready
Page 2: ......