28
Creating an Array
1.
Navigate to the disk panel (
ALT + W
, then press
1
)
2.
Select each disk you wish to include in your array
3.
Press
ALT + A
to open array panel
4.
Press
Create
:
5.
Press
Spacebar
to navigate and make selections (
TAB
also navigates)
Array Type
Refer to RAID Level Reference Guide for
information about different levels.
RAID 0, 1, 5, 6, 10, 50, and JBOD
Cache Policy
Write-back
-
Any data written to the array
will be stored as cache, resulting in better
I/O performance at the risk of data
failures due to power outages. Data will be
stored as cache before it is physically
