31
A user connected to a local network can remotely access the WebGUI using the IP
address of the host device.
To obtain your IP address
For
Windows
Users:
1.
Open a command prompt window on the host computer.
2.
Type
ipconfig
.
3.
Look for the section that contains your network adapter information.
4.
Note the IP address.
Example: The IPv4 address is under Ethernet adapter Ethernet 4 and is 192.168.1.143
Note
: Make sure
Restrict
to localhost access
is
disabled
in WebGUI
Setting
(Refer to
setting)
You can then remotely access the WebGUI using any other computer that is in your
local network by opening any web browser and typing
http://{IP address of host
computer}:7402
(default port is 7402).
For
Mac
Users:
1.
Open a
terminal
window on the host computer (computer that is connected to the
RocketStor 6414AS enclosure.)
2.
Type
ifconfig.
3.
Look for the connection that has
status
:
active
4.
Write the IP address located after
inet
:
