SECTION 8
-
PLUMBING SYSTEMS
HIGHLAND RIDGE TOWABLE
8-8
•
Open Valve #3 (Fig. 8.7 shows this valve in the closed position).
NOTE
: Valve #3 should be in the closed position (Fig. 8.7) for normal
operation.
•
Place the siphon hose in the container of fresh water (Fig. 8.7).
•
Turn on the water pump. This will pump the water into the fresh water tank.
•
When finished, turn off the water pump and reset all valves to their normal
operating position. Close all access panels that may have been removed.
Fig. 8.7 Water
Valves
Water Heater Bypass
•
Valve #4 should be open for normal operation (Fig. 8.8). This valve should be
closed to bypass the water heater.
•
Valve #5 should be closed for normal operation (Fig. 8.8). This valve should
be open to bypass the water heater.
Fig. 8.8 Water Heater Bypass
Summary of Contents for 2015
