Highland Ridge RV 2015, Owner'S Manual

Page: 49 / 120

HIGHLAND RIDGE TOWABLE SECTION 4 - TOWING & SET-UP
HRTT & FW 4-11
Fig. 4.6 Safety chain installation
Crisscross the left safety chain under the coupler and attach to the right mounting
slot in the trailer hitch; repeat with the right safety chain. Slack for each length
should be the same but not more than necessary to permit the vehicle to turn at its
minimum radius.
T
RAVEL
T
RAILER
S
ET
U
P
1. Position the RV as desired.
2. Level the RV (side-to-side).
3. Block the wheels securely to prevent the RV from moving.
4. Unhook the wire harness/connector plug, safety chains and breakaway switch
lanyard.
5. Install the dolly wheel or platform.
6. Release the weight distributing bars (customer supplied).
7. Open the tongue jack coupler latch.
8. Turn the tongue jack crank to raise the coupler above the hitch ball.
9. Level the RV (front-to-back) with the tongue jack crank.
10. If applicable, lower the stabilizer jacks.
11. Pull the tow vehicle away, as desired.