3-24
Cyberlight
User Manual
Adjusting the Mirror Head Deviation
You will need:
- 5/32 inch right angle allen wrench
You can easily pivot or offset the mirror head deviation up to 20 degrees left or right of center for a
total range of 40 degrees.
1.
Using an allen wrench, loosen the three 5/32 inch allen screws shown in Figure 3-32. Using
your hand, loosen T-handle that locks the mirror head in position.
Figure 3-32. Loosen the three 5/32 inch allen screws and the T-handle to adjust the
mirror head deviation.
Note
The mirror head deviation adjustment can be performed with the Cyberlight positioned
either on its back (as is shown in Figure 3-32) or on its front.
2.
Grasp both sides of the mirror head and rotate it until it is positioned according to your needs.
See Figure 3-33.
Loosen these 5/32" allen screws
Loosen this T-handle
Summary of Contents for Cyberlight
Page 123: ...C 8 Cyberlight User Manual...
