1-8
Cyberlight
User Manual
Identifying Rear Panel Components
This section describes the rear panel components, LEDs, switches, and connectors.
Figure 1-1. Identifying Cyberlight rear panel components.
1.
Quality Control (QC) plate - displays (from top to bottom) the fixture’s model number, serial
number, factory voltage setting, maximum volts and amps, manufacturing date and the initials
of the engineer responsible for Quality Control (QC) of the fixture.
2.
Lamp Assembly – removable from the rear of the fixture for easy lamp replacement (see
“Installing or Replacing the MSR 1200 Lamp” on page 1-16).
3.
Lamp Assembly Retaining screws – these two screws fasten the lamp assembly to the fixture
(see “Installing or Replacing the MSR 1200 Lamp” on page 1-16).
4.
Power On/Off Switch – press the “
I
” side to turn fixture power ON. Press the “
O
” side to turn
fixture power OFF.
5.
Lamp Optimization Screws – these three screws align the lamp for optimal output (see page
1-18).
6.
Address DIP Switch Settings – this chart lists the fixture number settings and shows how to
select either Lightwave Research (LWR) control protocol or one of three DMX 512 modes (see
“What is DMX 512 Protocol?” on page 2-2).
Summary of Contents for Cyberlight
Page 123: ...C 8 Cyberlight User Manual...
