Rev. C 02-2021
21
MTEC.6715.GB-C-1 Operation and maintenance manual HMA BT series English
HMA BT
,QGXVWULDOGHKXPLGL¿HUV
Packaging could be dangerous for the operators.
The packaging materials should be seperated and sent for disposal or possible recycling to specialist waste
companies.
4.4 Inspection
:KHQLQVWDOOLQJRUVHUYLFLQJWKHXQLWLWLVQHFHVVDU\WRVWULFWO\IROORZWKHUXOHVUHSRUWHGRQWKLVPDQXDOWRFRQIRUPWRDOOWKHVSHFL¿FDWLRQV
of the labels on the unit, and to take any possible precautions of the case. Not observing the rules reported on this manual can create
dangerous situations. After receiving the unit, immediately check its integrity. The unit left the factory in perfect conditions; any eventual
damage must be questioned to the carrier and recorded on the Delivery Note before it is signed. The company must be informed, within
8 days, of the extent of the damage. The Customer should prepare a written statement of any severe damage.
Before accepting the unit check:
• The unit did not suffer any damage during transport;
• The delivered goods are conforming to what shown in the delivery note.
,Q&DVHRI'DPDJH
• List the damage on the delivery note
• Inform the Company of the extent of the damage within 8 days of receipt of the goods. After this time any claim will not be considered.
• A full written report is required for cases of severe damage.
6WRUDJH
Units should be stored under cover and ideally, should remain in their packaging. The tools that are supplied for opening the electrics box
should be formally transferred to the person responsible for the plant.
8QSDFNLQJ
It is advisable to leave packaged units during handling and remove it before the installation.
The packaging must be removed carefully to prevent any possible damage to the machine.
The materials constituting the packaging may be different in nature (wood, cardboard, nylon, etc.).
When unloading the unit, it is highly recommended to avoid any sudden move in order to pro-
tect refrigerant circuit, copper tubes or any other unit component. Units can be lifted by using a
forklift or, in alternative, using belts, being sure that the method of lifting does not damage the
lateral panels and the cover. It is important to keep the unit horizontal at all time to avoid dam-
ages to the internal components.
/LIWLQJDQGKDQGOLQJ
4.5.1 Shipment
The shipment must be carried out by authorised carriers and the characteristics of the vehicle used must be such as to avoid damaging the
machinery transported/to be transported, neither during loading and unloading nor during transport. If the roads to be driven are irregular,
WKHYHKLFOHPXVWEH¿WWHGZLWKVSHFLDOVXVSHQVLRQVRULQWHUQDOZDOOVLQRUGHUQRWWRGDPDJHWKHXQLWGXULQJWKHVKLSPHQW
The maximum ambient temperature for storage/shipment is +45°C and the minimum is -20°C,
