HID FARGO DTC 5500LMX, User Manual

Page: 67 / 74

May 2017 PLT-02496, Version: 1.2
Page 5-13 Troubleshooting
5.2.4.1 Additional Printer Specific Tools
Label Description
INFO
Printer Type
Firmware Version
IP Address
Flipper
Lamination
Laminator Firmware Version
Magnetics
E-Card
Password
Card count
TEST PRINTS
Color Photo:
Select this choice to print a color card to test communication and integrity.
Alignment: Select this choice to print a card used to align the print image on the card.
Settings:
Select this choice to print a card with the Advanced settings.
Resin: Select this choice to print a RESIN test card.
Rewritable:
Select this choice to ERASE the Rewritable card.
Magnetic: Select this choice to test Magnetic encoding (Hi-Co only)
Lamination:
Select this choice to laminate a test card.
Hopper Select Select the hopper to input cards. Applies to dual-hopper printers.
ToolBox
Clean Printer:
Select this choice to run the clean printer routine.
Clean Laminator: Select this choice to run the clean laminator routine.
Calibrate Mag:
Select this choice to calibrate the Magnetic Sensor.
Calibrate Rib Sensor: Select this choice to calibrate the ribbon sensor.
Network:
Select this to choice configure network options
Language Select this choice to change the Printer Displayed Language.
Exit
Select this choice to exit the Printer Tool options.