HIAB K-HiPro 285-425-4 Series Operator'S Manual Download Page 59

Page: 59 / 114

4.14. Cranes with high seat [option]

The high seat is equipped for using tools and operated by

two joysticks: (1) and (2); and two foot pedals: (3) and (4).

The control valve is placed at the high seat.
The controls have the functions:
(1) Joystick

First boom: downward/upward

Add-on equipment

(2) Joystick

Second boom: downward/upward

Add-on equipment

(3) Pedal

Extension: out/in

(4) Pedal

Slew: clockwise/counterclockwise
For safety reasons, it is necessary to sit down on the seat

to operate the controls.

DANGER

Take care not to put your foot on the pedals when taking place in the high seat.

Unintentional crane movements can occur.

Hydraulic stabiliser extensions and legs are controlled by an additional control valve fitted to the

stabiliser beam.

Platform [option]

DANGER

Use the platform to access to the

high seat, never operate the crane

standing on the platform with the

controller.

The HiPro system

HIAB K-HiPro 285-425 X4

Summary of Contents for K-HiPro 285-425-4 Series



















































































































Search results

Summary of Contents for K-HiPro 285-425-4 Series

Reviews:

Related manuals for K-HiPro 285-425-4 Series

Brands by name

Popular brands

HIAB K-HiPro 285-425-4 Series, Operator'S Manual

Search results

Summary of Contents for K-HiPro 285-425-4 Series

Reviews:

Related manuals for K-HiPro 285-425-4 Series

Brands by name

Popular brands