HIAB K-HiPro 285-425-4 Series Operator'S Manual Download Page 41

Page: 41 / 114

Stabiliser legs

(13)

Green light on: Stabiliser leg set.

Red light on: OLP stabiliser leg.

Stability sector

(Cranes with VSL

function)

(14)

Red light on: 0-19% stability.

LED off: 20-69% stability.

Yellow light on: 70-89% stability.

Green light on: 90-100% stability.

Stability sector

(Cranes without

VSL function)

(14)

Green light on: regardless of the situation.

Cylinder pressure

(15)

1 of 4 green light on: 50% pressure.

2 of 4 green light on: 70% pressure.

3 of 4 red blinking light: 90% pressure.

4 of 4 red light on: 100% pressure.

4 of 4 red running light: OLP release activated.

LED test, see Daily inspection.

4.8. Dump valves

Dump valve 1. (1)
Allows operation of the crane functions. To prevent high

pressure and thereby unnecessary heating of the oil there

is an automatic dumping function. When no lever

movement has been made for 3 seconds the dump valve is

opened and the oil is returned directly to the hydraulic tank.

As soon as the operator moves a lever the valve closes.
Dump valve 2. (2)
Allows operation of the stabiliser extensions and legs only

when this valve is activated. The dump valve 2 will be placed between the main control valve and

the stabiliser control valve. The dump valve 2 must be activated from the user panel before the

stabiliser system can be controlled.

The HiPro system

HIAB K-HiPro 285-425 X4

Summary of Contents for K-HiPro 285-425-4 Series



















































































































Search results

Summary of Contents for K-HiPro 285-425-4 Series

Reviews:

Related manuals for K-HiPro 285-425-4 Series

Brands by name

Popular brands

HIAB K-HiPro 285-425-4 Series, Operator'S Manual

Search results

Summary of Contents for K-HiPro 285-425-4 Series

Reviews:

Related manuals for K-HiPro 285-425-4 Series

Brands by name

Popular brands