Hi-view H.264 User Manual Download Page 7

Page: 7 / 67

DVR User Manual

•

Supports pre-recording and post recording

•

Supports linked channels recording once motion or alarm triggered on certain channel

•

Supports linked PTZ preset, auto cruise and track of the corresponding channel

PTZ CONTROL

•

Supports various PTZ protocols

•

Supports 128 PTZ presets and 8 auto cruise tracks

•

Supports remote PTZ control through internet

SECURITY

•

Customize user right: log search, system setup, two way audio, file management, disk

management, remote login, live view, manual record, playback, PTZ control and remote live
view

•

Supports 1 administrator and 63 users.

•

Supports event log recording and checking, events unlimited

NETWORK

•

Supports TCP/IP, DHCP, PPPoE, DDNS protocol

•

Supports IE browser to do remote view

•

Supports setup client connection amount

•

Supports dual stream. Network stream is adjustable independently to fit the network

bandwidth and environment.

•

Supports picture snap and color adjustment in remote live

•

Supports remote time and event search, and channel playback with picture snap

•

Supports remote PTZ control with preset and auto cruise

•

Supports remote full menu setup, changing all the DVR parameters remotely

•

Supports mobile surveillance by phones with iPhone, Android & Blackberry OS

•

Supports CMS/NVMS to manage multi devices on internet

Summary of Contents for H.264



































































Search results

Summary of Contents for H.264

Reviews:

Related manuals for H.264

Brands by name

Popular brands

Hi-view H.264, User Manual

Search results

Summary of Contents for H.264

Reviews:

Related manuals for H.264

Brands by name

Popular brands