DVR User Manual
Step 7
: Click “Apply” button to save the setting.
Step 8
: Enter into Schedule tab. The setting steps for schedule for motion based alarm are
similar to normal schedule setup (see Chapter 4.4.1 for more details).
4.5.3 Video Loss
This DVR can be set up to detect video loss. The setting steps are as follows:
Step 1
: Enter into Menu
Setup
Alarm
Video Loss. Refer to Fig 4-21:
Step 2
: The setup steps of video loss trigger are similar to “Alarm Handling” (See Chapter
4.5.1 Sensor
Alarm Handling setting for more details).
Fig 4-21 Alarm Configuration-Video Loss
4.5.4 Other Alarm
This tab gives a choice to configure alarm for Disk Full, IP Conflict, the Disconnect event,
Disk Attenuation or Disk Lost.
Step 1
: Enter into Menu
Setup
Other Alarm. Refer to Fig 4-22:
Fig 4-22 Other Alarm
Step 2
: Use the dropdown menu and select the event or the alarm.
Step 3
: Check the required trigger options.
If the selected event is “Disk Full”, then use the drop down box for “Disk Shortage Alarm” to
25
