DVR User Manual
choose a threshold value for remaining HDD space. If the threshold value is reached, the
system will trigger the Disk Full Alarm.
Step 4
: Click “Apply” to save the setting.
4.5.5 Alarm Out
Alarm out includes three sub menus: alarm out, schedule and buzzer.
To setup alarm out:
Step 1
: Enter into Menu
Setup
Alarm Out. Refer to Fig 4-23:
Fig 4-23 System Configuration-Alarm Out
Step 2
: Input relay name and select hold time.
Step 3
: Enter into Schedule tab. This will go into schedule setup interface. The setting steps
for schedule for alarm out are similar to normal schedule setup (see Chapter 4.4.1 for details).
This step is very important for alarm out. Even if you have enabled alarm out in the motion
based alarm or sensor based alarm, you will not see the result of alarm out if no schedule is
added here.
To set up buzzer:
Step 1
: Enter into Menu
Setup
Alarm Out
Buzzer.
Step 2
: Checkmark Buzzer and set buzzer alarm hold time. This would trigger the buzzer
when the system is on an alarm.
4.6 Network Configuration
Network configuration includes five submenus: network, sub stream, Email, server and other
settings. Network settings must be configured if DVR is used for monitoring over network.
4.6.1 Network
To set up network:
Step 1
: Enter into Menu
Setup
Network
Network tab. Refer to Fig 4-24:
26
