Work modes Introduction
26
Notice:
1). Instrument height should be measured from control point to the
height measurement point of the measurement reference bench.
2). The measurement reference bench radius is 0.130 meter.
3. Record point name, receiver S/N, receiver height, beginning
time.
4. Press power button to power on and double click power button to
set static collecting mode.
Notice:
The satellite LED flashing means the receiver is searching the
satellites. The satellites are fixed once the satellite LED stays light
on. Network LED flashes due to your collection interval set, which
means an epoch will be collected every flash.
5. Turn off the receiver after static data collected and record the turn
off time.
6. Download and post-process static data.
Caution
：
1) Don’t move the tri-bra
n
ch or change the collecting set while the
receiver is collecting data.
2) V100 GNSS receiver doesn’t support recording Rinex format
data.
