V100 GNSS RTK System Getting Started
37
5. Make sure your controller has SIM
cards installed.
Select the right APN option.
6. Press
⑥
to select communication
mode.
7. Select
CORS.
8. Enter the IP &Port value got from
the CORS operator.
9. Press
Set
to get and select
mount-points (nodes).
10. Enter the username & password.
11. Tick
RTCM1021/RTCM1023
if your
CORS service operator provides
this type of message.
12. Select the Message Type same as
the node you selected.
13. Set the needed Elevation.
Press
Set
to finish setting.
