c) On either side of the enclosure rails, pull the blue release tabs and push the enclosure into the rack.
The enclosure latches will engage with the rail latch when properly seated.
Figure 18: Blue Tabs
Figure 19: Enclosure Installed
6.
Install the CMA.
a) The CMA has one arm that is connected to the rails and the enclosure chassis by four connectors.
The first step in installing the arm for the CMA is to first determine what orientation the arm needs to
be in. The arm should have the elbow on the left side.
b) Orient the CMA so that the elbow is on the left-hand side.
27
4
Installation
Installation Guide
4.2
Ultrastar Serv24 Installation Procedure
