c) Mount the rail on the side of the enclosure and slide toward the rear to lock it in place.
Figure 9: Inner Rail Lock
d) Follow these steps for the second inner rail on the opposite side of the enclosure.
3.
Install the outer rails into the rack.
Note:
• Each rail is labeled either right or left. Ensure that the rails are installed in their assigned
configuration.
• Install the rails into whole rack unit (U) sections as seen in the following image. The rails will
not mount properly if staggered across two different U's.
Figure 10: Rack Units
a) Move to the rear of the rack.
b) Orient the rail so that the word "REAR" that is embossed into the metal of the rail is at the rear end
of the rack, and the release button is facing the side of the rail.
22
4
Installation
Installation Guide
4.2
Ultrastar Serv24 Installation Procedure
