![background image](http://html1.mh-extra.com/html/hgi-generators/hrd270t1/hrd270t1_operation-and-maintenance-manual_2128487027.webp)
Harrington Generators International
22
HRD Diesel Generator
498-1052
Operation
NOTICE
For safety reasons, the battery isolator will be turned
off prior to delivery. It is recommended that this
action is repeated when moving the generator or for
long term storage.
Operation
The guidelines for operating the generator are outlined
in the section.
The HRD1500rpm range of generators are resiliently
enclosed within an acoustically treated housing
providing noise attenuation. Large access doors on
both sides enable ease of servicing and maintenance
in a tight space.
The HRD270T1 utilises a standard control panel using
a Deep Sea Electronics 4510 (DSE4510) controller.
The Deep Sea controller can be con
fi
gured for local
and remote operation.
When con
fi
gured for local operation the operator
can stop and start the set and monitor the generator
and engine condition at the set using the green start
and red stop buttons and instrument panel on the
DSE4510 control module.
When con
fi
gured for remote start the output terminal
pod on the output panel is used to connect the set to a
remote Automatic Mains Failure (AMF) panel or timer
volt free switch. The switched connection can then
transmit a start and stop signal to the DSE4510 to
initiate the generator start up or shutdown procedure.
In order to action this signal the DSE4510 will need to
be placed in AUTO mode.
Output
Panel
Remote
Control /
Panel
Output
Terminal
Pod
400V 3Ph
Output
Generator
*Schematic for illustration only.
Generator Layout
Output Panel
Emergency
Stop
Service Access
Door
Radiator
Access
Lifting Beam
Access
Exhaust
NB Layout may vary depending upon model please
refer to General Arrangement Diagrams.
Orientation
Right
Left
Rear
Front
Example: The Output Panel is located at the Rear Left
of the Generator