Heyl Softmaster ROE 2, Operating Instructions Manual

Page: 27 / 35

27

35
LANGUAGE
German -
English

French -
Italian -
Dutch -
Polish -
RELEASE
none

read only -
active
-
SERIAL-NO.
123456
ERROR HISTORY
display
clear
Release
With the built-in serial interface, it is possible to either program the controller or to
request controller data via a PC/laptop and to carry out remote maintenance via an
analogue, digital or wireless modem (the
@
Softmaster ROE 2
@
program is necessary):
Release mode:
none = Data transfer locked
read-only = Only reading of data is allowed
active = Reading/writing of data and
programming allowed
Language
Selection of the desired display language:
At present, these five
A
standard
@
languages are available. Other languages are
available if desired by customers.
Serial number
With this function it is possible to display the serial number of the unit.
A
SERVICE
@
menu
Request and change current settings and statuses of the unit in the service menu.
Manual flush
Start a flush of the plant via this manual function. After the start a return to the operating
display occurs. The maximum flushing duration is limited to 99 minutes.
End the flush with the
A
Run/Stop
@
key.
Automatic flush
Start a flush of the plant with the programmed flushing duration (also see
"M"
 BASIC
PROGRAM  Flushing duration
) via this manual function. After the start a
return to the production display occurs.
It is possible to end the flush at any time with the
A
Run/Stop
@
key.
Error history
Open the error history via
A
display
@
. The error history is a list of the errors which have
occurred during current operation.
An occurred error is recorded with error number, time and date,
e.g.:
Low w. press. 6
16:56 16.09.03
A maximum of 20 errors are stored in a circular buffer, i.e. the oldest error is overwritten by the next error if the buffer is
full.
The buffer of the error history is deleted via
A
delete
@
and recording restarted.
The list is not deleted after a power failure.
Flush
99m
Flush
1m