Heyl Softmaster ROE 2, Operating Instructions Manual, Page: 5 / 35

5

35
Description of display and operating features
A On/Off switch
Only the wall-mounted variant is equipped with a On/Off
switch. Use this switch to switch the unit on or off.
B Safety fuse, max. T6.3A
The safety fuse protects the outputs against overload or a
short circuit. (Inside the unit)
C Thermal fuse (optional)
Thermal fuse protection for the pump motor, max. 6.3 A.
D "ENTER" key
Confirm inputs and trigger functions with the ENTER key.
E Arrow keys
Use these keys to operate the menu drive in the display
and to enter values and programming data.
F "M" key
Call the menu and return from submenu levels.
G "Run/Stop" key (
A
Production/Standby
@
)
Manual triggering of production: Plant is put into
operation or manual triggering for STOP/ Standby: Plant
goes into the Standby position.
H "Fault OFF" key
Deletes the alarm signal at output 'AL' (Alarm); a fault
display can only be deleted if the fault has been
eliminated.
I LED functions
LED symbols always signal the status of the plant,
independent of the level (menu) being worked on.
J LC display
Two lines, each line with 16 characters, backlit.