12
13
Selection of Peak Hold or Track Mode
The Torque wrench offers two different torque functions.
In Track Mode it is possible to trigger a preset target value.
In the Peak Hold Mode you can hold or save the actually
reached measured value.
The both different modes can be viewed as follows:
Note:
1. If ErO appears, it means the wrench has been torqued to
more than 110% of maximum torque.
2. If you create a Torque value of 5 Nm in the Track Mode the
display will show an start with 5 Nm, so when you create
less than 5 Nm the Display will show no value changes. The
minimum Torque value for the 1/4“ + 3/8“ series is 3 Nm.
3. When you reach the maximum setting range the green and red
LED will fl ash together.
Track Mode
25
.
00
N·m
long pressing
Peak Hold-/ Track Mode
e
T
For selection
press
Setting the Peak Hold-/ Track Mode
e
P
Press
Record number
*Note 1
Press
Delete recording
*Note 1
Press
Peak Hold or Track Mode
25
.
00
N·m
Max. Torque value
*Note 1
START
C
(System initial)
25
.
00
N·m
*Note 2
Create a torque above 5 Nm
Current torque value
18
.
00
N·m
Reached 90% of Target Torque
Current torque value
22
.
50
N·m
Buzzer
Green LED
Reached above 90% of setted Torque
((...((... ...))...))
((...((... ...))...))
Reached the max. target torque
Track Mode
25
.
00
N·m
*Note 3
Buzzer
Red LED
Target Torqe is exceeded
((...((... ...))...))
((...((... ...))...))
M
T
1
M
P
1
M
T
1
M
T
1
M
PT
1
M
T
1
> >
U/S
U/S
U/S
U/S
