14
15
Peak Hold
Note:
1. If appears ErO , it means that the Wrench has been torqued
to more than 110% of the maximum torque.
2. If appears FULL , it means the wrench‘s memory is full and no
more values can be recorded. Please refer to the „ Peak Hold
Mode recorded Value Review“ to clear the memory records.
3. When you reach the maximum setting range the green and red
LED will fl ash together.
Peak Hold Mode
recorded Value Review
Note:
1. The Peak Hold recorded value review can also be performed in
the mode „monitoring“.
2. If you operate in the „Peak Hold“ mode, the display will show
MODE . Please go over to the next step.
3. If there are no records, the display will show NONE
4. This function is not supported on all types of models.
5. The Communication mode is for uploading recorded data to a
PC.
6. The Communication mode is also for calibrate the torque
wrench. Please contact your local dealer for more information.
Max. Torque value
*Note 1
START
C
(System initial)
22
.
50
N·m
Create Torque value
Current Torque
value
18
.
00
N·m
P
Reached 90% of Target Torque
22
.
50
N·m
Buzzer
Green LED
Reached above 90% of setted Torque
((...((... ...))...))
((...((... ...))...))
Reached the max. target torque
25
.
00
N·m
*Note 3
Buzzer
Red LED
Target Torqe is exceeded
((((((((( )))))))))
((((((((( )))))))))
18
.
00
N·m
P
Released
Create Torque
value
fl ashes
M
*Note 2
ec
Recording
M
P
1
M
P
1
M
P
1
Peak Hold / Track Mode
*Note 1
25
.
00
N·m
Delete
22
.
50
N·m
*Note 2
M
P
1
M
P
1
Setting Peak Hold / Track Mode
long pressing
U/S
Press
U/S
Record No.
005
Auto
change
*Note 3
18
.
00
N·m
>
>
Recorded value
Press
U/S
Peak Hold /
Track Mode
Delete Record
CL
>
Press
U/S
*Note 4, 5, 6
Communication
Yes
C
C
(Exit)
U/S
No
(Task)
U/S
EL
Deleted
5E
