5. Cleaning and Maintenance
• Empty the bag and clean it with clear water or if necessary with mild soapy water. In
this case, rinse thoroughly, taking care to turn it over.
Do not twist it to wring it, do not put it into the washing machine.
Do not clean with a high-pressure cleaner.
• Also rinse any wastes trapped under the flap and in the turbine.
• Replace the filter bag, making sure that the cord is properly seated on the entire slot
provided in the chassis.
• Retighten the cord closure screw so that the filter can not escape when it is in the
water.
NB1: We advise you to change the filter bag every year for optimal cleaning.
NB2: 3 types of filtration fineness exist, do not hesitate to contact your dealer.
IMPORTANT!
Never operate the robot if the filter is damaged or the fastener
is broken.
B - Robot cleaning
The robot must be cleaned regularly with clean water and you must check and possibly
remove the waste stuck in the drive or in the turbine.
No external mechanical parts require special lubrication or maintenance.
C - Preventive maintenance
To ensure the efficient daily operation of robot PEPS, it is important to check every
week these few points:
• The condition of the belts, their wear rate, tension. Insure if there is no chewing gum
or other stuck in the drive of the pulley or the grooves of the rollers.
• Check the wear of the brushes to avoid damaging the robot and the pool lining
• Unroll the self-floating cable at the edge of the pool to ensure that it can not be twisted
and looped. Ideally, wait about 10 minutes before roll it up.
• Finally, check the general appearance of the robot: screws, the trolley wheels, the
condition of the filter, possible impacts on the body, the battery of the remote control ..
www.myhexagone.com • [email protected] • Tél. +33 1 34 34 11 55
15
