background image

3. How to install your PEPS?

A. Unpacking

Unpack the unit with the necessary precautions. Do not use sharp tools (Cutter, ...).
In the presence of a driver or a technician, check the entire robot - control box, trolley,
chassis, radio control ... . to detect any damage due to transport.

In  case  of  doubt,  do  not  hesitate  to  make  reservations  on  the  transport

voucher by 

briefly 

describing the damages sustained.

  Only  the  consignee  can  file  a                       

complaint with the carrier within 48 hours, and by registered letter. In addition, you
must also notify us within 48 hours otherwise we will not be able to do anything.
If  your  device  is  not  in  perfect  condition,  or  if  it  does  not  work,  notify  your  dealer                  
immediately and do not try to turn it on again without the advice of a qualified
technician approved by us.
We recommend that you keep the original packaging and materials for future transport 
under perfect conditions.
The packaging must contain the following elements:
• the robot PEPS with its power cable;
• Its trolley;
• the control box and its touch screen;
• the remote control;
• an envelope containing at least the technical manual and the screws for the trolley.

B. Electrical connections

For your safety and the correct operation of your PEPS follow the instructions below:
• Place the control box at a distance of at least 3.5 meters from the edge of the pool,
avoiding direct exposure to the sun or rain. It can be either placed on the ground or
hung on the trolley but in the shade.
• When attaching the control box to the trolley, make sure that the control box is held
securely with the fastening screws supplied with the plate provided and that the trolley 
is at least 3.5 meters from the edge of the basin.
• Connect the robot cable to the control box and lock the connector.
• Make sure that the red «I / O» switch on the side is set to «O»
• Only connect the control box to an electrical outlet equipped with a ground terminal
and protected by a residual current protection system of 30 mA maximum (if in doubt,
contact your electrical installer).
• If you use an extension cord to connect your vacuum cleaner to the mains, make sure
that the control box can not be placed within 3.5 m of the pool edge.

www.myhexagone.com • [email protected] • Tél. +33 1 34 34 11 55

9

Summary of Contents for PEPS 200



































Reviews: