2. Safety rules
Do not use the pool bottom vacuum cleaner robot PEPS if you notice a problem on a
part of the robot or see a defective or missing element.
Do not use the pool vacuum cleaner PEPS if the pump or turbine is defective or
damaged. Do not use it if the turbine blades, screws, nuts or cables are defective.
Do not use the pool bottom vacuum cleaner robot PEPS if the main switch does not
operate.
Always switch off the pool bottom vacuum cleaner PEPS using the main power switch
when the robot is not in use. The pool bottom vacuum cleaner robot PEPS can only
be started when the main switch is in position 1 and if the correct PIN code has been
entered.
Hexagone Manufacture SAS does not guarantee the total compatibility between the
pool bottom vacuum cleaner PEPS and other types of wireless device such as remote
controls, radio transmitters, listening loops, roller shutters.
You are not authorized to modify the original design of the pool bottom robotic
vacuum cleaner PEPS. All changes are at your own risk.
The low voltage cable can not be shortened or prolonged. Place the low voltage cable
so that the turbine blades are never in contact with it or that the cable should not be
placed under the pool vacuum cleaner robot PEPS.
Do not drop the self-floating cable plug in water, as it is not waterproof. Furthermore,
do not drop it on the floor, it could damage your tile and even hurt you.
Never attempt to repair a damaged power cable. Contact your dealer for a replacement
by the original cable to avoid any injury.
If by accident the control box falls into the water, it is imperative to disconnect the
electrical socket before to pull it out.
It is forbidden to open the control box as this action can cause an electric shock.
Contac
t a qualified t
echnician.
www.myhexagone.com • [email protected] • Tél. +33 1 34 34 11 55
6
