4. How to use your PEPS?
1 - Automatic operation
In this program, named MetroNav, your robot will move according to sequences
predefined in its micro processor, allowing it to detect walls and change direction
according to the dimensions of your pool. The program is made to operate in most
pools by perpendicular cross with a preliminary intellectual clearance.
If this configuration is not suitable for the size or shape of your pool, please contact
your dealer to adapt the robot program to the specific conditions of your basin.
There is a delay button (hourglass) allowing the robot to go 3 hours later; in this case,
please put the black button on the control box in position «I».
• Press the «GO» button to turn on your robot.
• The robot starts in a few seconds. The «AUTOMATIC PROGRESSION» screen of your
dashboard is displayed. This indicates the progress of the pool cleaning and indicates
the remaining time.
• When the program is finished, the robot stops. It is better to bring the robot back with
the radio control close to you rather than pulling on its cable.
• Then toggle the «I / O» switch to the position «O» and disconnect the power cord from
the mains plug.
IMPORTANT!
There are certain pools where the shape, the bottom of the
pool (eg central island, a high level of the bottom mouth ...)
or environmental data such as a temperature (eg water at
10 ° C ...) or the chemical nature of water (eg. very high level
of salinity, a permanent proliferation of algae ...) make it
impossible to use your robot in automatic mode. Please
contact us for more details.
www.myhexagone.com • [email protected] • Tél. +33 1 34 34 11 55
12