23.04.2014
15 / 21
Controller settings
Overlap ‘Controller settings’ allows modifying basic parameters, including date and time, display unit parameters or sounds.
Date and time
Entering ‘Date and time’, we successively set pulsating
parameters according to guidelines provided on the left
side. Required value is selectable with arrows.
Then, we proceed to the next item using the OK
pushbutton.
Display unit
Display unit parameters allow changing screen backlight brightness (1-10, darkest / brightest).
The second parameter is setting of inactivity time until backlight dimming - the screen will get dimmed if user does not touch any
keys for preset time.
Sounds
Sound parameters allow setting keyboard sound (if set to YES - we will hear characteristic sound when pressing controller
operation pushbuttons). The sound of alarms indicates an acoustic signal when faulty equipment operation is detected.
RS485 port
It is an interface used for data acquisition or controlling the unit through an external controller. Master device decides about the
settings of transmission rate, and physical and logic address.
Language
It is possible to choose the language for communication with the controller from among those available in the database (Polish,
English, German).
