Hewalex PCWU 2.5kW Instructions For User Download Page 16

23.04.2014
16 / 21

Measured indications

Measured  indications  are  available  from  the  main  menu.
Here,  we  have  one  list of all temperature  readings  in  the
system,  and  signals  from  safeguards and  an  external
controller. During correct operation, the LP and HP contacts
and  an  external  control  unit  should  be  closed. Opening  of
the LP and HP contacts  indicates  equipment  failure
connected  with  cooling  medium  pressure,  or  pressure
controls damage.

Info

Here you will find the id. number of software used by automatics, needed in case of possible update.

5

Anti-Legionella

The  type  of Legionella bacteria  occurs in  water  environment. Their  growth  is  supported  by stagnant  water  in  the  tank  at  the
temperature of 38-42°C. Illness, which they may develop, is called Legionellosis (type of pneumonia). Its symptoms include the
following: high fever, loss of consciousness, cough, respiratory failure. Influenza-like symptoms, diarrhoea, vomiting, bronchitis,
or fatigue and chronic respiratory disorder are also possible. Legionellosis is considered an infectious disease according to the
Ministry  of  Health. In  case  of  incorrect  treatment  it  may cause  death. In  majority,  the  disease  cases  are  observed  in
Mediterranean countries, however occasionally it appears in Poland as well.

An  effective  method  to  destroy Legionella  bacteria is  periodic  tank  superheating  to  water
temperature reaching 70°C. At this temperature the bacteria completely perish. The equipment
is  provided  with  possibility  to  use  anti-Legionella  superheating  every  week  between  midnight
(Sunday/Monday)  and  6  a.m.  on  Monday. During  that  time  the  tank  is  superheated  to  the
temperature  of 70°C either  by  an  electric  heater,  or  e.g.  gas-fired  boiler,  depending  on  the
option  chosen  by  user (described  in  detail  in  par. ‘Operation  parameters  settings’, ‘Anti-
Legionella’).

If water remained in the tank unused for several days, perform an additional superheating (e.g.
after return back home).

NOTE:

Install mixing valve at the tank outlet so as to avoid burns during the Legionella superheating,
especially if water is used by small children.

According to: http://www.e-instalacje.pl/a/3244,bakterie-legionella-w-instalacjach [Joanna Ryńska, 06.12.2004]
Photos: http://www.cruiselawnews.com/tags/legionella/

6

Equipment maintenance

Detailed procedures related to the equipment maintenance are specified in installation-service part of the manual, Maintenance
chapter. User should remember about periodic checks of safety valve according to the valve manufacturer’s requirements, and
about cleaning of the filter of air drawn into the heat pump.

Summary of Contents for PCWU 2.5kW






















Reviews: