background image

6. Technical data

 

 
 

6.1. General:

 

Frequency range: 

 400 - 470 MHz 

 

 

Other frequency ranges available on request 

RF synthesizer: 

 Microprocessor-controlled PLL synthesizer with 

 

 32 selectable frequencies 

RF output: 

 <10 mW standard 

 

 Higher transmitter outputs available on request 

RF certifications: 

 Certified for frequency ranges subject to approval 

and freely assignable frequency ranges in over 
40 states 

Modulation: 

  FM - narrow bandwidth

 

Bandwidth: 

  12.5 kHz/25 kHz according to the system 

Range: 

  Approx. 100 meters (with standard aerial)

 

 

  Approx. 200 meters (with special aerial) 

Addressing: 

  20-bit (over 999,999 individual options)

 

Temperature range: 

  -25 °C - +70 °C (-18 °F - +160 °F) 

Resistance to moisture: 

  0 - 97 % max. (applies only for    

 

condensation) 

Response time: 

  Approx. 55 ms 

Baud rate: 

  2,400/4,800 bps

 

Main components: 

  Surface mounting, modular construction 

Diagnosis: 

 Status displays for RF communication;  

operating voltage displays for transmitter and 
receiver; undervoltage display 

Certificates: 

  CE, TÜV, ISO 9001 to name a few 

 

6.2.  Rechargeable batteries and battery charger:

 

Operating voltage: 

9 - 30 VDC or 110/230 VAC

 

Charging time: 

Approx. < 4 hours 

Service life: 

Approx. 900 charges 

Type: 

NiCd or NiMh (depending on version) 

Capacity: 

600 mAh/1,200 mAh (depending on version) 

Contacts: 

Gold-plated, self-cleaning contacts 

 

6.3. Transmitter:

 

Type: Ergonomically-shaped 

housing 

Housing material: 

Fiberglass-based polyamid with 30% glass fibre 
rate, according to the system 

 

Other materials available upon request 

Protection class: 

IP 65 

Weight: 

Less than 2.00 kg (including non-rechargeable 
batteries or rechargeable battery), according to 
the system

 

Aerial: Internal 
Non-rechargeable or rechargeable  
battery housing: 

Electrically separated with gold-plated, self-
cleaning contacts

 

Summary of Contents for CS 434

































Reviews: