Operating instructions
1. Safety
1.1. Safety of this radio remote control system
This radio remote control system is equipped with both electronic and
mechanical protection devices.
When allocated, coding applies to one transmitter only, meaning that control
commands cannot be received from other transmitters.
This concerns your safety
In the event of incorrect operation or misuse, there is a risk of harm to
-
the health of the operator or other persons, and
-
the machine and other property.
All persons working with this radio remote control system
-
must be both suitably qualified and have been instructed as
required
by
regulations
-
must strictly comply with the contents of these operating
instructions.
1.2. Safety information and tips
The following symbols are used for warnings and advisory notes in these
operating instructions, with the following meanings:
This symbol is used to warn you of the risk of fatal accidents or serious
injuries. Such risks can arise whenever operating or working
instructions are not strictly followed.
This symbol is used to warn you of the risk of damage to the machine or
to other property if the operating or working instructions are either not
followed or not followed properly. Disregarding these warnings may
void
your
warranty.
This symbol is intended to draw your attention to particular features or
important information designed to make your work easier.
Summary of Contents for CS 434
Page 21: ...11 poliger Sockel 11 pole socket 3 2 1 RX CP housing 11 pin socket View A A view...
Page 30: ......
Page 31: ......
