8
Installation and Operating Instructions for Heta SL800 Aqua stove Pevex1018/AH/ver1:Jan 2013
seal to tear off next time the door is
opened.
Risk of explosion
After you add new fuel, it
is very important that you do
not leave the stove unat
tended until the wood is burning
constantly. This will normally occur
within 30 to 60 seconds.
A risk of explosion can possibly arise
if too much wood is placed in the st-
ove. This may result in the production
of large volumes of gas, and this gas
can explode if the intake of primary
and secondary air is insufficient.
It is an advantage always to leave
some ash lying in the bottom of the
comb-
stion chamber.
Take care when emptying the ash
pan, as cinders can continue to
burn in the ash for long periods of
time.
embers. Low-effect heating is achie-
ved when the wood is glowing, i.e.
there are no more flames because the
wood fuel has been transformed into
glowing charcoal.
Optimal combustion
For optimal combustion and heating,
this stove is designed to provide an
optimum mix of primary and se-
condary air (in these instructions, we
call this combustion air). The stove
provides excellent heating efficiency
and the window is easy to maintain as
the secondary air ‘flushes’ the surface
of the glass. Note that the stove will,
of course, blacken if the airflow is too
low. If there is too little oxygen, there
is a risk that the window, etc. will
Blacken due to the formation of soot
deposits. A combination of incorrect
combustion and damp wood fuel can
cause a heavy, sticky coat of soot
to form, which may cause the door
Stove data table in accordance with EN 13240 testing.
Stove type
Scan-Line series
Nominal
fluegas
temperature c°
Smoke
stub
mm
Fuel
volume
kg
Draught
min
mbar
Nominal
output
tested kW
Output
to water
kW
Output to
the room
kW
Output
to water
%
Output to
the room
%
800 Aqua
182
ø150
1.9
0.13
8.7
5.6
3.1
64
36
Stove type
Scan-Line series
Maximal
operation
pressure
bar
Water con-
tence of the
boiler
litres
Efficiency
%
Distance to flammable
materials in mm
behind at the
the stove sides
Distance to
furnitures from
the stove in
mm
Stove
weight
kg
800 Aqua
4
14
87
22 175
750
173
The nominal output is the output to which the stove has been tested.
The test was carried out with the secondary air 70% open.
