13
Installation
• Connect the device plug on the connecting cable of
the LED KIT to the socket of the pole supply cable. Pay
attention to the correct conductor assignment.
Note:
See overview on page 4!
If the LED KIT was ordered with a long connecting
cable, lower the connecting cable into the cable junc-
tion box through the opening in the pole top or, in
the case of suspended luminaires, pull it through the
suspension tube and clamp it to the cable junction
box.
Note
If mains are frequently subject to peaks in voltage,
take additional relevant surge protection measures as
necessary.
B
• (B)
Place the LED KIT with the support plate / base
plate on the luminaire base and fix with the 2 threa-
ded screws provided (
M6)
.
Note:
For asymmetrically radiating LED KITs, align the
carrier plate so that the mark (coloured dot) faces the
desired beam direction.
Note: For fine alignment turn LED KIT or loosen pole
flange and align luminaire on pole!
• (C)
Reassemble luminaire completely.
• Connect luminaire with the mains and check function.
• Mark upgrade on LED, if necessary in the luminaire/
on the pole. Keep assembly instructions for mainte-
nance at a later date.
• Correctly dispose of removed materials/components.
C
M6
M6
