HE 5731 Operating instructions
28
# 373344, Version 1.5
Parameterisation
7. Parameterisation
7.1. Parameterisation with Device Keyboard
1.
Press the PARA key to change the values of the system
parameters. A flashing LED indicates the value currently
to be changed.
cod
2.
If a password has been assigned,
cod
is displayed.
3.
Press the ENTER key.
4.
Press the UP and DOWN keys to enter the password digit
by digit.
5.
Press the ENTER key to acknowledge the password.
As long as you stay in the parameter menu, the password
does not need to be entered again.
6.
Use the UP and DOWN keys to select the required param-
eter.
The current value is displayed.
7.
Press the ENTER key to change the parameter value. The
first digit to be changed flashes in the display.
8.
Use the UP and DOWN key to set or change the value of
the digit.
9.
Press the ENTER key to acknowledge the value.
The next digit then flashes in the display
10. Repeat steps 8 and 9 to set the second and third digit.
The next parameter is offered.
11. If necessary, change the next parameter.
12. The parameterisation mode is terminated by pressing the
PARA key again. To enter the parameter menu once
again, you must re-enter the password.
