Part Number 3080006.001, Rev. D
©2012, HES, Inc.
4
Configure
6
Install the Shaft Extension.
If your cabinet door thickness is greater
than ½”, install the Shaft Extension to the
Antenna/Reader to ensure proper
engagement into the lock. Install the Shaft
Extension to the shaft as shown here and
firmly tighten the screw.
Door Thickness
Extension
Shaft Used?
1/16” – ½”
NO
> ½” – 1 ½”
YES
7
Install the Key Override Paddle.
If a Key Override is used, install
the Key Override Paddle on the
arm of the lock body as shown
here and firmly tighten the
screw.
8
Key Override Door
Preparation.
If a Key Override is used, drill a hole in
the door based on cam length (
R
).
8a. Measure cam length (
R
).
8b. Calculate the distance from the lock
features based on the image to the
right.
8c. Drill a hole in the door based on the
cam lock installation instructions.
Shaft Extension
2-56 X 1-¼ screw
(provided)
0-80 X 1/2 screw (provided)
Table 1
Latch centerline
Drill hole in door
based on cam lock
installation
instructions.
=
Key Override
Paddle
